Copyright 2011. figNoggle Designs.
7x10, 7x12, 7x14 Mini-Lathe Information Website Links Post a link to your website or view other hobby and machine and metalworking websites for free.
|
Rent Mill & Lathe DVDs at Smartflix | Great aluminum & steel prices at OnlineMetals
STAMP AND CRIMP MACHINE
This is the first prototype of the
stamp/crimp machine built using the mini-mill. Simple design. Operable manually or by timer.
No
safety mechanism in place.
here's a picture. nothing fancy here. this was a
quick proto just to get things going. built in early 2005.
no mechanical advantage. just a plain single-action
air cylinder.
1.5" bore at 100psi => pi*[(bore/2)^2] * 100 = 176
lbs. |
|
|
|
Looking for mini-mill help and how-tos? How about lathe help and how-tos? We're prototyping a benchtop CNC vertical mill using the DigiSpeed-XL interface card for Mach, Dart Controls and KB Electronics KBIC/KBMM 90VDC motor controllers, 1.5HP treadmill motor from Surplus Center and a R8-spindle head from the X2 mini-mill - not to mention Gecko servo drives and an entirely closed-loop system. Come take a look!CNC 8x12 Lathe Check out our newest developments like the CNC/DRO 8x12/8x14 lathe using Gecko drives, break-out board, NEMA 34 step motors, DRO and more!
SUPERX3.COM
Sieg X3 and Super X3 Grizzly G0463 Info MDAHacks.com T-Mobile MDA / Cingular 8125 / HTC Wizard Hacks, Tweaks, Tips, Tricks and More!
Metal Working FAQ.NET Your source for metalworking and machining, tips, tricks, and more. Over 50 content wiki sites!
|