Warning: Table 'txp_log' is marked as crashed and should be repaired select host from txp_log where ip='38.107.179.241' limit 1 in /home/.sites/143/site2/web/workshop/textpattern/lib/txplib_db.php on line 84

Warning: Table 'txp_log' is marked as crashed and should be repaired insert into txp_log set `time`=now(),page='/workshop/article/263/harbor-freight-8x12-lathemaster-8x14-cnc-plans-and-kits',ip='38.107.179.241',host='38.107.179.241',refer='',status='200',method='GET' in /home/.sites/143/site2/web/workshop/textpattern/lib/txplib_db.php on line 84
figNoggle Designs: Harbor Freight 8"x12" / LatheMaster 8"x14" Mini-Lathe / Small-Lathe CNC Plans and Kits

Harbor Freight 8"x12" / LatheMaster 8"x14" Mini-Lathe / Small-Lathe CNC Plans and Kits · Dec 25, 23:53

While certainly not as ubiquitous of a lathe as the 7x, we’re currently working on the CNC plans and DRO installation plans (then kits) for the 8x lathes.

There are still a few more Sieg X2 mini-mill products that we’re getting ready to launch before the lathe products come out.

Stay tuned in early 2007!

Take a look at the status of the build.

Commenting is closed for this article.