Warning: Table 'txp_log' is marked as crashed and should be repaired select host from txp_log where ip='38.107.179.241' limit 1 in /home/.sites/143/site2/web/workshop/textpattern/lib/txplib_db.php on line 84

Warning: Table 'txp_log' is marked as crashed and should be repaired insert into txp_log set `time`=now(),page='/workshop/article/273/prototype-plastic-injection-molding-machine-in-development',ip='38.107.179.241',host='38.107.179.241',refer='',status='200',method='GET' in /home/.sites/143/site2/web/workshop/textpattern/lib/txplib_db.php on line 84
figNoggle Designs: Prototype Plastic Injection Molding Machine In Development

Prototype Plastic Injection Molding Machine In Development · Feb 19, 20:21

We’ve taken quite a bit of time with this one, but finally posted an updated page on its development. This will be a benchtop model that can reliably produce parts of size to be determined (? oz. shot) either driven pneumatically with a programmable logic controller (PLC), manually via lever operation, or electric drive.

Click here to visit the page.

Comment

Commenting is closed for this article.